Geotextile is now more popular, now is not only the construction of road engineering will use geotextile, in a variety of water conservancy projects will also introduce geotextile in large quantities, and in the future geotextile is likely to continue to like other industries and fields.

How to choose the specification of Geotextile

Although geotextile is widely used, in order to meet the needs of different projects, the specifications of geotextile are also increasing, which leads to many people who do not understand when choosing geotextile, just like buying clothes without knowing their own code and not letting them try, it is helpless.

So how to choose the specification of Geotextile in practical engineering application? If you really don't understand or can't understand it, pay attention to two points: either follow the requirements of the designer or follow the suggestions of the on-site technical personnel. These two points are relatively safe methods. Of course, if you can only come by yourself, please follow two principles, that is, thickness should not be thin, width should not be narrow.

If you choose arbitrarily, the specification of geotextile may not meet the standard or match the actual project demand. If you use it forcibly, it will cause certain difficulty to the construction personnel and affect the construction progress of the actual project. This consequence is not easy to bear.

Three notes on purchasing Geotextile

When purchasing geotextiles, in addition to working hard on specifications, we should not be careless in other aspects, mainly including the following three points for attention.

1. When selecting geotextile, if you can choose thick geotextile, do not use thin geotextile, because compared with thin geotextile, thick geotextile not only has good tensile strength and pressure resistance, but also plays a very good role in blocking and protecting in the use process.

2. Choose the national standard geotextile as much as possible, because the performance of the non-standard geotextile in all aspects is inferior to that of the national standard geotextile, especially in the strength, puncture resistance and durability.

3. Select the geotextile as wide as possible, because in the process of construction, the number of geotextile welding or stitching can be reduced, and the construction progress can be greatly improved.

The above is how to choose the specification of geotextile and three points for attention of geotextile manufacturers