In order to give full play to the advantages of geotextile and reduce unnecessary laying troubles in the later stage, it is necessary to carry out relevant inspection and preparation before the construction of geotextile.

Good quality of geotextile is an important prerequisite for the construction of geotextile concrete. Before laying the geotextile, it is necessary to conduct a comprehensive and detailed inspection on the geotextile itself. Cracks and holes on the geotextile shall be repaired in time to meet the use of the old geotextile, and the worn geotextile shall be replaced in time. Construction site inspection is also an important preparatory work. Whether the base is flat and solid is within the inspection scope. At the same time, through field investigation, some sharp damages of geotextile can be eliminated in time. Before the actual construction, it is necessary to carry out the geotextile test workshop to determine whether the length, width and tightness of the geotextile are appropriate, and to grasp the reasonable size.

The majority of users must carefully survey and prepare for the construction in order to reduce some unnecessary troubles. Here, our company sincerely looks forward to friends from all walks of life to visit and purchase, and we will provide you with the best quality products.

Geotextile welding technology is an important part of geotextile laying. In order to smooth the geotextile laying and other related work, it is necessary to pay attention to the geotextile before and after welding.

The geotextile shall be cleaned before welding, and there shall be no sharp objects and stains during welding. At the same time, it is necessary to adjust the welding single piece of the two geotextile joints so that the lap joint has certain broadband, flat and wrinkle free. In order to facilitate welding, it is better to adjust the direction of unit welding geotextile during laying.

Choosing the best welding method is an important guarantee to ensure the normal development of geotextile. Generally, hot welding is an ideal welding method. The development and welding of geotextile should be completed by professional technicians. In order to make the geotextile completely attached after welding, sandbags should be used.